Fuguang

Hotline:400-668-8627

搜索

语言切换

语言切换

Time of issue:2020-04-29 00:00:00
1 1
Your location :
Homepage
/
/
/
RG1 Universal Rain Gauge

Brand instruments

Brand Instrument

image/rg1 副本

RG1 Universal Rain Gauge

It is a general rainfall sensor, which can meet different application fields such as agriculture, hydrology and meteorology; the sensor is equipped with a filter to prevent debris from entering the sensor; the entire sensor is made of aluminum material, and the complete set of masts and pipe clamps and other mounting components There are two models of 0.1 and 0.2mm. Suitable for the connection and use of multiple RTU equipment of ADCON. The measuring principle AdconRG1 is a pass-through rain gauge, which can meet the needs of most applications, and can be used in agricultural, hydrological, meteorological applications and harsh environments for a long time. The RG1 rain gauge weighs less than 0.5 kg and is suitable for rod installation and ground
image/rg1 副本
Product description
Technical indicators
It is a general rainfall sensor, which can meet different application fields such as agriculture, hydrology and meteorology; the sensor is equipped with a filter to prevent debris from entering the sensor; the entire sensor is made of aluminum material, and the complete set of masts and pipe clamps and other mounting components There are two models of 0.1 and 0.2mm. Suitable for the connection and use of multiple RTU equipment of ADCON.
 
 
 
Measuring principle
 
Adcon RG1 is a through-type rain gauge, which can meet the needs of most applications, and can be used in agriculture, hydrology, meteorological applications and harsh environments for a long time.
 
The RG1 rain gauge weighs less than 0.5 kg, is suitable for rod installation and surface installation, and can be measured by a double tipping system. The double tipping system is factory calibrated, even in the case of rain reaching 60mm per hour, it can still keep the rain gauge passing a
Accuracy. The tip angle of the tipping bucket is steep, which is convenient for the water to pour. It can prevent the sand, dust and other funnels in the tipping bucket with a 200 cm2 water collecting hole from collecting rainwater, and through an aluminum filter to prevent the water collecting hole from being blocked by leaves and bird droppings. The funnel is connected to the main body through a bayonet lock device to prevent it from being blown off by strong wind.
 
All components (except the tipping bucket) are made of aluminum and are anodized to provide excellent protection and durability.
 
The sensor is equipped with two pipe clamps for rod mounting equipment and a 1 meter shielded cable with a Pentax 7-pin connector, which is compatible with all R723 series A723, A733 and A753.
 
Application field
 
  • Agricultural or hydrometeorological station

  • Industrial rain gauge

  • Water and sewage company market use

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
Technical index
Resolution (mm): 0.2
Water collecting hole size (cm2): 200/400
measuring equipment: Double tipping system
Capacity / min value under certain precision:
+ — Up to 1mm (0.4) with 2% accuracy
+ -5% accuracy is 1-2 mm (0.4… 0.8)
output signal: Each dump will produce a pulse
Reed switch: Free-potential reed switch, fully sealed, made in Germany Meder, can operate more than 1 million times
weight: 0.5 kg / 1.1 lbs
Material: Anodized aluminum
cable: 1m / 3.3ft long PUR shielded cable
Connector: Pentax 7-pin M9 male plug
Operating temperature: Freezing point to + 75 ° C (+ 167 ° F)
heating: Not applicable

 

Copyright ©2020 Fuzhou Fuguang Water Science&Technology    闽ICP备12013341号-2 

Fuzhou Fuguang Water Science&Technology Co.,Ltd

闽ICP备12013341号-2 

 Powered by www.300.cn