Fuguang

Hotline:400-668-8627

搜索

语言切换

语言切换

Time of issue:2020-04-29 00:00:00
1 1
Your location:
Homepage
/
/
/
SOLITAX ™ sc turbidity / suspended solids probe / suspended solids analyzer

Controllers and sensors

Controllers And Sensors

1_35

SOLITAX ™ sc turbidity / suspended solids probe / suspended solids analyzer

-Typical application SOLITAX ™ sc turbidity / suspended matter analyzer can be used to measure sludge concentration in sewage treatment plants, evaluate the quality of activated sludge or the entire biological treatment process; turbidity measurement, raw water and sedimentation of filter backwash water in waterworks Turbidity measurement of pond effluent; water quality monitoring of industrial production processes / circulating cooling water. -Instrument characteristics ● SOLITAX ™ sc turbidity / suspended matter analyzer can detect both turbidity and suspended matter (or sludge) concentration ● Using dual-beam infrared and scattered light photometer detection technology ● SOLITAX ™ sc turbidity / The probe of the suspended solids analyzer has
1_35
Product description
Technical indicators
-typical application
 
SOLITAX ™ sc turbidity / suspended matter analyzer can be used to measure sludge concentration in sewage treatment plants, to evaluate the quality of activated sludge or the entire biological treatment process; turbidity measurement of filter backwash water in tap water plants, raw water and turbidity in sedimentation tank Degree measurement; industrial production process / water quality monitoring of circulating cooling water.
 
-Instrument characteristics
 
● SOLITAX ™ sc turbidity / suspended matter analyzer can detect both turbidity and suspended matter (or sludge) concentration
 
● Adopt dual beam infrared and scattered light photometer detection technology
 
● The probe of SOLITAX ™ sc turbidity / suspended matter analyzer has self-cleaning function
 
● LED emits near infrared light of 880nm, which can compensate the color of the sample
 
● SOLITAX ™ sc turbidity / suspended matter analyzer provides multiple installation methods
 
-Advantage
 
1) Double-beam infrared and scattered light photometer detection technology can be used to measure both turbidity and suspended matter (or sludge) concentration
 
2) The LED uses 880nm near infrared light, the detection result is not disturbed by the color in the sample
 
3) Continuous measurement, fast response speed, suitable for continuous monitoring and control
 
4) Various ranges, sensor materials and installation methods are available to meet various application needs
 
5) The SOLITAX ™ sc turbidity / suspended matter analyzer is equipped with a self-cleaning system for more stable operation and lower maintenance
 
-working principle
 
Inside the measuring probe of the SOLITAXTM sc turbidity / suspended matter analyzer, there is a built-in LED light source at an angle of 45 °, which can emit near infrared light at 880nm to the sample. The scattered light at the angle of ° is detected by the detector in this direction. After calculation, the turbidity of the sample is obtained; when the sludge concentration is measured, the scattered light is formed at an angle of 140 ° to the incident light and is detected by the back in this direction Detector, and then the suspended matter analyzer calculates the signal intensity detected by the detector before and after to give the sludge concentration value. Because the LED emits near infrared light at 880nm, even if the sample has color, it will not affect the measurement result.
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
Technical index
Units of measurement Optional NTU, FNU g / L, mg / L, ppm, or% solids
measurement accuracy
Turbidity is less than 1% of reading, or ± 0.001NTU, whichever is greater;
Suspended solids: less than 5% of reading (depending on sludge homogeneity)
 
Repeatability
Turbidity: less than 1% of reading;
Suspended solids: less than 3% of reading (whichever is greater)
Response time 1 second
installation method
The pipeline plug-in installation uses a ball valve with a minimum diameter of 100mm (carbon steel and stainless steel);
Immersion installation uses poolside fixed installation
Sample flow rate 3m / s
Operating temperature 0~40℃
Sample temperature 0~40℃
Sample pressure 6Bar
Probe size
Plug-in type: 60 × 315mm;
Immersion sensor: 60 × 200mm
Probe weight
Plug-in type: 2.4KG;
Immersion: stainless steel 1.38KG, PVC 0.52KG
cable length
Standard: 10 meters, optional cables: 7.6 meters, 15.2 meters, 30.5 meters, maximum length 100 meters.
 

 

Copyright ©2020 Fuzhou Fuguang Water Science&Technology    闽ICP备12013341号-2 

Fuzhou Fuguang Water Science&Technology Co.,Ltd

闽ICP备12013341号-2 

 Powered by www.300.cn