Fuguang

Hotline:400-668-8627

搜索

语言切换

语言切换

Time of issue:2020-04-29 00:00:00
1 1
Your location:
Homepage
/
NISE sc nitrate analyzer

Controllers and sensors

Controllers And Sensors

NISE-sc-硝氮分析仪

NISE sc nitrate analyzer

-Typical application NISE analyzer is suitable for industrial wastewater discharge of nitrification and denitrification process of sewage treatment plant can not exceed 30% ● Built-in matrix calibration ● Sample does not need pretreatment, suitable for 24/7 uninterrupted online monitoring ● New protective coating ensures longer service life of the membrane head ● Can be connected to the digital SC controller platform ● Optional cleaning device to reduce maintenance Working principle The nitrate nitrogen (NISE) analyzer uses ion selective electrodes. The NISEsc sensor has a chloride ion selective electrode,
NISE-sc-硝氮分析仪
Product description
Technical indicators
- typical application
 
Nitrogen nitrate (NISE) analyzer is suitable for the nitrification and denitrification process of wastewater treatment plants. The discharge of industrial wastewater cannot exceed 30%
 
 
 
-Instrument characteristics
 
● New generation sensor and membrane head performance is more stable
 
● Can automatically compensate for the influence of interfering ions
 
● Built-in matrix calibration
 
● The sample does not need pretreatment, suitable for 24/7 online monitoring
 
● The new protective coating ensures a longer service life of the membrane head
 
● Can be connected with digital SC controller platform
 
● Optional cleaning device to reduce maintenance
 
 
 
- working principle
 
The nitrate nitrogen (NISE) analyzer uses ion selective electrodes. The NISE sc sensor consists of a chloride ion selective electrode, a pH electrode (reference electrode) and a temperature electrode to form an integrated electrode. Several parameters in the integrated electrode or sensor cylinder (CARTRICAL technology) can be corrected to reduce interference. The analyzer can perform flexible online correction to further improve the accuracy of the measurement.
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
Technical index
Measurement methods: Ion selective electrode method, using ion selective electrode and reference electrode of nitrate and chloride for potential measurement
Range: 0 to 1000 mg/L [NO3–N]
0 to 1000 mg/L [Clˉ]
Accuracy: 5% of measured value + 0.2 mg / L1
Reproducibility: 5% of measured value + 0.2 mg / L1
Response time (90%): < 3 分钟 ( 5 t o 5 0 mg / L )
Measurement interval: Continuous measurement
pH range: pH 5 - pH 9
Calibration method: Sensor membrane head code (including factory calibration information in code form)
Single-point and two-point matrix calibration
Power consumption: 1W
powered by: Powered by SC controller
data transmission: Powered by SC controller
Environmental data:  
storage temperature: Sensor: –20 to 60 ° C (–4 to 140 ° F)
Cane: 5 to 40 ° C (41 to 104 ° F)
Operating temperature: Air temperature: –20 to 45 ° C (–4 to 1 13 ° F)
Water temperature: +2 to 40 °C (35 to 104 °F)
Maximum flow rate: < 4 m/s
Maximum immersion depth of the sensor: :0.3 - 3.0 m
Maximum pressure of the sensor: 0.3 ba r
Air compressor maximum pressure: 3.1 bar
size: 320 mm x 84.5 mm (length x Ø)
cable length: Standard length: 10 meters, optional lengths: 5, 10, 15, 20, 30, 50 meters, optional maximum extension length: 100 meters
weight: 约2380 g

 

Copyright ©2020 Fuzhou Fuguang Water Science&Technology    闽ICP备12013341号-2 

Fuzhou Fuguang Water Science&Technology Co.,Ltd

闽ICP备12013341号-2 

 Powered by www.300.cn