FUGUANG

Hotline:400-668-8627丨MALL中文

1 1
Your location :
Homepage
/
/
/
A512 moisture sensor interface

Brand instruments

Brand Instrument

image/a512 副本

A512 moisture sensor interface

The new improved sensor amplifier interface allows AdconRTU to connect up to three standard moisture sensors simultaneously. Measurement principle The new and improved sensor amplifier interface allows AdconRTU to connect up to three standard moisture sensors simultaneously. The A512 moisture sensor interface is a newly designed amplifier that can connect up to three standard moisture sensors (model 200) at the same time. Compared with the old products, this product can be directly connected with the existing moisture sensor without special plug. In addition, the product can be added and replaced separately. Moisture sensor has 发
image/a512 副本
Product description
Technical indicators
The new and improved sensor amplifier interface allows Adcon RTU to connect up to three standard moisture sensors simultaneously.
 
 
 
Measuring principle
The new improved sensor amplifier interface allows Adcon RTU to connect up to three standard moisture sensors simultaneously.
 
The A512 moisture sensor interface is a newly designed amplifier that can connect up to three standard moisture sensors (model 200) at the same time. Compared with the old products, this product can be directly connected with the existing moisture sensor without special plug. In addition, the product can be added and replaced separately.
 
The moisture sensor has been patented, contains two concentric electrodes placed in a special matrix material, and uses a stainless steel housing. Its special matrix material can reflect the resistance change of the sensor to the extent of the crop growth period. Sensors often absorb or release soil moisture: when the soil dries, the sensor water will decrease and the resistance between the electrodes will increase. The measured resistance is converted to centibar and indicates the moisture absorption of the soil.
 
The A512 moisture sensor interface is equipped with three special grommets to fix the bare cable of the standard moisture sensor: just pass the cable through the grommet and connect the end of the cable to the cage spring clip inside the interface, then close the cover !
 
The A512 moisture sensor interface uses an aluminum housing, which has excellent mechanical protection and is indestructible. For more than 10 years, the addIT series
RTU also uses this kind of shell.
 
The sensor has been used for many years. Compared with gypsum block, it will not dissolve with time and is not affected by freezing temperature, so it can be used underground all year round. You can install up to three sensors at the same depth at the same time to detect the distribution of water at a certain depth, or you can install it at different depths to detect the penetration of water.
 
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
Technical index
Measuring object: resistance
Measuring range: 0~200 cBar
Accuracy: +/- 5%
Number of sensors: Up to three standard moisture sensors
output signal: 0~2.5v
Wiring with RTU: 3-meter cable with Pentax 53 waterproof connector IP-67 level 7-pin connector
compatibility A720、A723、A732、A733
shell: Aluminum with fixed rod
Protection level: IP-67 frame
size: 100x110x50mm length x width x height (including buttonhole and mounting bracket)

 

Customer message
 Fuguang

Mainly engaged in the distribution of environmental monitoring instruments and meters, as well as the integration and operation and maintenance of environmental monitoring systems; Research and development, production, and sales of environmental monitoring instruments;

Copyright ©2023 Fuzhou Fuguang Water Science&Technology    闽ICP备12013341号-2  Powered by saa 

 Fuguang

Follow Fuguang Water

 Fuguang

Official Taobao Store

Fuzhou Fuguang Water Science&Technology Co.,Ltd

闽ICP备12013341号-2  Powered by saa