MAG5000

　　Measuring principle: using the Faraday electromagnetic induction measuring principle, the electromagnetic principle of pulsed DC magnetic field

　　Design: Modular design, communication between modules through bus, high reliability

　　Maximum measurement error (including sensor): 0.4%±1mm/s (optional)

　　Display: 3 lines of characters with backlight LCD dot matrix display, which can display instantaneous flow, accumulated amount and flow rate, etc.; touch keys, can operate and set on site without opening the cover.

　　Data protection: When the power is cut off or interfered, all data is stored in the pluggable SENSORPROM. It adopts 16-bit microprocessor for signal processing, programmable data function, and powerful intelligent self-diagnosis function.

　　Maintenance: The transmitter is replaced, and the user does not need to calibrate again to ensure accuracy; there is no need to re-set the user

　　Simulation function: single-point simulation or interval slope simulation is available, which is convenient for system joint adjustment and integration.

　　Zero point adjustment: automatic

　　Excitation frequency: pulsed DC

　　Output signal: isolated 4~20mA + active/passive pulse output + contact input/output

　　Communication: optional

　　Ambient temperature:

　　• Operation: -20-+50 °C

　　• Storage: -40- +70 °C

　　Degree of protection: IP 67

　　Shell material: glass fiber reinforced polyamide

　　Power supply: 115-230 V AC +10%-15%, 50-60 Hz,

　　Sensor for dosing

　　Measuring principle: adopt pulse DC excitation method

　　Flange standard: EN 1092-1

　　Shell protection level: IP68 (split type)

　　Material

　　• Flange and housing: carbon steel, two epoxy coatings to prevent corrosion

　　• Electrode: Hastelloy C-276 (optional)

　　• Lining: PTFE (optional)

　　Modular design: Built-in SENSORPROM, replace the converter to ensure accuracy

　　Installation: pipe flange installation

　　Online verification: SENSORPROM stores information and supports online verification

　　Sensors for ordinary sewage and tap water

　　Measuring principle: adopt pulse DC excitation method

　　Flange standard: EN 1092-1

　　Shell protection level: IP68 (split type)

　　Material

　　• Flange and housing: carbon steel, two epoxy coatings to prevent corrosion

　　• Electrode: Hastelloy C-276

　　• Lining: Hard rubber

　　• Ground electrode: the same material as the measuring electrode

　　Modular design: Built-in SENSORPROM, replace the converter to ensure accuracy

　　Installation: pipe flange installation

　　Online verification: SENSORPROM stores information and supports online verification

　　Sensor for dosing (clamping)

　　advantage:

　　Sensor size: DN2-100 (1/12"-4")

　　Clamping design to meet EN 1092, DIN and ANSI flange standards

　　Corrosion-resistant AISI 316 stainless steel sensor housing

　　High-impedance lining and electrode, suitable for most demanding process media

　　The temperature class is up to 200℃

　　Enclosure protection grade IP67/NEMA 4X/6

　　The patented built-in calibrator can use the "magnetic characteristics" information in the SNESORPROM chip.

　　technical parameter:

　　Measuring principle: electromagnetic induction

　　Process connection: EN 1092-1 (DIN 2501), ANSI B 16.5 class 150 and 300

　　Shell protection grade: IP68 (separate)

　　Ambient temperature: -40… +100 °C

　　Medium temperature:

　　MAG 1100 (ceramic): -20-+150 °C

　　Material

　　• Housing: stainless steel (AISI 316L (1.4404))

　　• Electrode: platinum electrode

　　• Lining: ceramic

　　• Ground electrode: stainless steel