



Your location:

Homepage

/

Controllers And Sensors

/

Dissolved oxygen analyzer

/

2LDO® II dissolved oxygen probe

Controllers and sensors



Controllers And Sensors

分类出来 



2LDO® II dissolved oxygen probe

-Introducing a new generation of hash LDO probes to measure dissolved oxygen, everything becomes easier. -Working principle: Fluorescence method-Typical application-Sewage, industrial water, drinking water With the breakthrough fluorescent technology of Hach Company, the probe basically needs no maintenance, because there is no need to replace the diaphragm, no electrolyte solution is added, and there is no need to polish the anode and cathode. No missing service cleaning service prompts can be customized, when the service prompt message is automatically triggered, then it will never operate

产品描述

Technical indicators

-Introduction

A new generation of hash LDO probes measure dissolved oxygen, everything becomes easier.

-Working principle: fluorescence method

-Typical applications-sewage, industrial water, drinking water

-Features and benefits

No calibration required

Hach LDO® II probes are available out of the box, no calibration is required, and the lifetime of the fluorescent cap is up to two years

No need to change the diaphragm

With Hach ’s breakthrough fluorescence technology, the probe is basically maintenance-free, because there is no need to replace the membrane, no electrolyte solution, and no need to polish the anode and cathode.

No missing service

The cleaning service prompt can be customized, and the service prompt message is automatically triggered at that time, so that the probe cleaning cycle will never be missed.

No drift

The epoch-making 3D calibration technology makes the Hach LDO II probe accurate calibration before leaving the factory, and the measurement is more accurate than ever!

Stronger

The innovative Hach LDO® II housing uses new materials and double seals with O-rings and ultrasonics to improve durability. At the same time reduce the size, making it easier to operate

扫二维码用手机看

Technical index
Measuring range	0 ~ 20.00 ppm
	0 ~ 20.0 mg/L
	0 ~ 200% saturation
Sensor immersion depth	Pressure limits: 34 meters, 345 kPa (112 ft), 345 kPa (50 lb);
measurement accuracy	± 0.1 ppm below 5 ppm
	± 0.2 ppm above 5 ppm
	Temperature: ± 0.2 ° C
Transmission distance	Use junction box up to 1000 meters (3280 feet)
Response time	At 20ºC:
	95% within 60 seconds
	90% within 40 seconds
cable length	10 m
Resolution	0.01 ppm (mg / L) / 0.1% saturation
Wetted material	Fluorescent cap: acrylic resin. Probe body: CPVC, polyurethane, Viton, Noryl, 316 stainless steel
Reproducibility	±0.1 ppm (mg/L)
size	Diameter x Length: 49.53 x 255.27 mm (1.95 x 10.05 inches)
Operating temperature	0 to 50 ° C (32 to 122 ° F)
weight	1 kg (2.2 lbs)
Flow rate	no request